Home Automation
Using X-10 Compatible Components
This inexpensive and easy to use two-wire switch can replace most ordinary wall switches in minutes to give you X10 control of devices on the circuit. The push button allows you direct local control over lighting or the switch will respond to ALL LIGHTS ON/ALL UNITS OFF/DIM/BRIGHT & commands issued elsewhere on the powerline. Can be used with loads up to 500 watts.
Available in white
only.HC467 X10 Wall Switch Module $14.16
For remote and local X10 control of 2 or more switches that operate the same light, replace your existing switches with the 3-Way Wall Switch Set. Each light requires a master switch, plus one slave switch for each of the additional control points of the same light. Push button ON/OFF control of incandescent lights up to 500 watts. Responds to ON/OFF, DIM/BRIGHT, and ALL LIGHTS ON/ALL UNITS OFF by X10 signal.
HC4777 X10 Wall Switch Set (1 Master, 1 Slave), 3-Way $18.94
XT277 X10 Extra Slave Switch $7.57
For
control of 3-way light switch applications; control of the same light from two or more switches, master and slave
dimming switches replace your existing 3-way switches. Slave switch
required, use HC8294. Responds to DIM/Bright, and ALL LIGHTS ON/ALL UNITS OFF command.
Includes white and ivory trim kits.
Wallplate not included. For additional colors, see trim kits LV6081.
Can also be used as single pole switch.
HC8383IW X10 Master Dim Switch, 3 Way, Incandescent $24.01
HC8294 Generic X10 Slave Switch $11.99
Get 3-way control of appliances or fluorescent and incandescent lighting with this X10 compatible switch. Like the HC8291 appliance switch, but for 3-way control where two or more switches control a single light or appliance. Master and slave switches replace your existing 3-way switches. Add extra HC8294 slave switches for systems controlled by 3 or more switches. Rated 20A. Requires neutral wire and slave switch. Wallplate not included. Responds to ALL LIGHTS ON/ALL UNITS OFF command.
HC8293IW 3-Way X10 Appliance Switch (Master)
$36.02
HC8294 Generic X10 Slave Switch $11.99
Controls 16 X10 Modules at the touch of a button! Just plug it in...no wiring necessary. Maxi-Controller sends signals over your existing house wiring to control lights and appliances connected to X10 Modules. The all-lights-on button instantly floods your house with light if you hear a suspicious noise at night. The all-units-off button turns off all modules with a single keystroke. Turn user selected groups of lights on, off or dim at your command anywhere you have a Maxi-Controller! Put one in each room for complete control of your house anywhere! .
XT503 X10 Maxi Controller $21.87
Lights, A/V components and/or appliances can turn on automatically when you enter a room, and turn off after you leave with the new XTMS13A motion sensor by X10. It works in conjunction with any X10 Transceiver (Such as the XT751) or X10 security system to provide you the comfort of never tripping into a dark room again. The XTMS13A sends wireless RF signals to the transceiver which passes them on to your house wiring. These signals are then receiver by X10 lamp, appliance or wall switch modules to control lights, A/V components or appliances around the home. As long as you keep moving, the light or appliance you designate will stay on, but will turn off in 1 to 256 minutes (fully adjustable) when movement stops.
Leviton Deluxe Base Tranceiver receives all 16 unit numbers on a house-code, and has a built-in appliance module too!
LV6314 Leviton Transceiver $43.37
The X10 Lamp Module is the simplest and most effective way to control your household lights.
Lighting control is simply a plug-in away. The X10 Lamp Module plugs into any standard 110v household outlet and gives you the ability to remotely control any incandescent light you plug into the module (up to 300 watts). The Lamp Module is actually a receiver that reacts to X10 signals generated by X10 transmitters elsewhere on the powerline. Simply dial in any house code and unit code you choose for each module and away you go! Don't worry about losing manual control of the lamp..it will function normally even with the module in place. The Lamp Module is the foundation of your home lighting system.
HC465 X10 Lamp Module $11.93
Versatile
Appliance Module Controls Most Everything!
Installs in seconds
ON/OFF control
Manual override feature
The X10 Appliance Module works in much the same fashion as the XT465 Lamp
Module, but it can handle larger 110v loads up to 15 amps, up to 1/3
horsepower motors and incandescent loads up to 500 watts. Set the
Appliance Module to whatever house code and unit code you desire and
you're off! Use this module with timers, manual and intelligent
controllers, telephone responders and a variety of other X10 devices for
virtually limitless control of lights and appliances throughout your home.
Does not respond to ALL LIGHTS ON or DIM/BRIGHT commands. Available in two
prong (HC486) or three prong (HC466) configurations. White only.
 |
DIGITAL
DESIGN 9910 Aspen Avenue N.W. Bemidji, MN 56601 Phone: (218) 751-7276 Fax: (218) 751-6575 Email: sales1@dig-des.com |
|